FREE shipping to the lower 48 states on all orders over $200! *Shipping charges will apply to orders to Hawaii and Alaska*

BVV 2 LB MK-V Bi-Directional Closed Loop Extraction Kit
Best Value Vacs 2 LB MK-V Bi-Directional Closed Loop Extraction Kit EK0005-Closed Loop Extractors-Kind Garden Supply
Best Value Vacs 2 LB MK-V Bi-Directional Closed Loop Extraction Kit EK0005-Closed Loop Extractors-Kind Garden Supply
Best Value Vacs 2 LB MK-V Bi-Directional Closed Loop Extraction Kit EK0005-Closed Loop Extractors-Kind Garden Supply
Best Value Vacs 2 LB MK-V Bi-Directional Closed Loop Extraction Kit EK0005-Closed Loop Extractors-Kind Garden Supply
Best Value Vacs 2 LB MK-V Bi-Directional Closed Loop Extraction Kit EK0005-Closed Loop Extractors-Kind Garden Supply

BVV 2 LB MK-V Bi-Directional Closed Loop Extraction Kit

  • Vendor
    Sale price
    Regular price
    Unit price


    Buy the BVV 2LB MK-V Bi-Directional Closed Loop Extraction Kit online from Kind Garden Supply today! FREE Shipping and Insurance to the Lower 48 States! Lowest Price Guarantee!

    We believe it’s better to buy everything you need at one time, so we’ve created a package that includes an orthrus, vacuum pumps, and complete extraction system. The best part? Buying this kit will save you money compared to purchasing each component individually.

    ***Note: Solvent not included with systems unless ordered separately. Any order with butane WILL NOT SHIP EXPEDITED.***

    DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well-ventilated areas. Check with your local fire marshal for guidance when operating indoors

    The 2lb Bi-Directional closed loop increases efficiency by utilizing both a bottom and top solvent input. By using a bottom flood on the first wash to ensure all material has seen solvent, preventing channeling through the material. Finish the run with a top flood input to ensure all residuals have been washed from the material. Oil-bearing solvent is collected in the collection base under the material column. Once collected, the solvent is distilled and recovered, leaving the oils in the collection base. This is a passive unit that utilizes pressure differences created by manipulating temperature to move solvent.

    Extractor Configurations:

    • Explorer: Our standard bi-directional extractor model.  Comes with a welded bottom base and standard LP tank.  This model provides all the benefits of the Orthrus design without any bells and whistles.  The Explorer model is perfect for those looking to get the bi-directional performance but have a budget. Explorer models can be upgraded after purchase.
    • Professional: This model features upgrades to help produce a higher quality extract.  Solvent is entered into the system through an injection coil.  This coil is chilled with dry ice and alcohol, dropping solvent temperatures to dewax inline. Fats and waxes are not soluble when solvent temperature is subzero, so chilling solvent on input is the simplest way to achieve high clarity extract.  The Professional also comes with a removable bottom on the collection base. This makes removal of extract after the run as easy as possible. 
    • Elite:  The Elite series is our fully upgraded Orthrus model.  The elite series adds a level of dependability needed for those seeking to produce the highest quality extracts.   It features a larger bore on valves and hoses, all American instrumentation valves by SSP, an AVCO ultra-low temperature inline ball valve, jacketed collection base, and stainless steel LP tank.  Full dewaxing is guaranteed by combining both an injection coil and sleeved column.  Both units are packed with dry ice, making both solvent and material sub-zero temperatures.  The material column is fitted with a nitrogen assist port, which helps ensure no solvent gets stuck with the material. The Elite series boasts increased efficiency on both solvent input and recovery by bumping up all valves and lines to 3/8” JIC.  The jacketed collection gives precision during recovery, allowing a heated fluid to be circulated around the base.  This method keeps temperature both accurate and consistent. The stainless steel LP tank is able to be opened and cleaned, making solvent contamination a non-issue.   *NOTE* This model requires a heater circulator or chiller
    Explorer Professional Elite
    • Standard Valves
    • Welded Bottom Base
    • 1.9 ECO Oven
    • VE160 7CFM Vacuum Pump
    • Standard Valves
    • Splatter Platter Base
    • Injection Coil w/ hose
    • 1.9 ECO Oven
    • VE160 7CFM Vacuum Pump
    • SSP Valves
    • Injection Coil
    • Dewaxer
    • AVCO Ball Valve
    • Jacketed Base/Platter
    • 3/8” Valves/Lines
    • SSLP
    • Nitrogen Assist
    • 1.9 NEO Oven
    • VE160 7CFM Vacuum Pump

    This Unit Includes:

        • Collection Base
        • 10"x10" Welded Bottom Base
        • Assembled 10" Hemispherical bi-flow lid
        • 4"x24" Material column with reducer & top cap
        • 4" filter plate kit
        • 1.5" Solvent input manifold
        • 1.5" Ball Valve
        • #30 LP tank
        • (2) 1/4" 48" High-Pressure PTFE Braided SS Hose
        • 3/8" 48" High-Pressure PTFE Braided SS Hose
        • 10" clamps, (3)4" clamps and a (3)1.5" clamp with gaskets
        • (2)4" Gaskets w/ filter Extra of each type of gasket
        • Instruction Manual

     *Note:  Column capacity may vary depending on the density of packed material and packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity.  Low density, uncut, and/or lightly packed material can reduce capacity by 50%. For best results, we recommend to tightly pack coarse ground material.


            FREE shipping to the Lower 48 States.  If you live in Alaska, Hawaii, or Puerto Rico, Please contact us for a shipping quote.

            All orders are processed from 9am to 6pm Central time.  Orders recieved after hours or on the weekends will be processed the next business day. 

            All orders canceled after 48 hours are subject to a $20 administration fee whether or not your order has shipped. If your order has shipped, you (the buyer) will also be responsible for actual return shipping charges. Refunds will only be issued to the original credit card that you use when placing your order.

            There is a 30-day return policy from when the carrier has confirmed delivery to residence to when a return request has been submitted. Return policies do not transfer to patrons who are not the purchasing customer unless the items were noted as a gift at checkout and the same applies to warranty cases. 
            - Items must be returned in original packaging. 
            - Items must be returned in undamaged condition and free of any signs of usage such as: botanical material, resins, cleaning agents, stickers, decals, etc. 
            - Items showing signs of damage, usage, opened packaging, or wear and tear will result in a 25% restocking fee. NO EXCEPTIONS. 
            - There is an automatic 15% restocking fee on all items unused and in original packaging unless the items are exchanged for something of equal or lesser value. NO STORE CREDIT WILL BE GIVEN. 
            - It is recommended to insure your item against any shipping damage by the carrier. When the delivery date of your return has been confirmed by the carrier, it may take up to 24-72 hours to process the order, inspect the item, and test the item (depending on reason for the return). Once the item has been processed, a refund will be issued for the original purchase price of the item. (Note: a 15% or 25% charge may be applied if the item has been determined as used or damaged). 
            - Shipping charges will not be refunded, unless items prove to be defective upon arrival, in which case carrier is responsible for initial shipping charge. 

            (Note: it may take several additional business days for your Credit Card to show the refund on your account. All payments made using E-checks may take 3-15 business days to be refunded.)